Melanotan II 10 mg Vials · Kit of 10

Melanotan II

Cyclic seven-residue melanocortin peptide (MT-II)

10 mg per vial

10 vials per kit

from 1 kit

Lyophilized powder

≥ 99.0% HPLC (spec.)

Stocked

Research topic: Pigmentation · group: Melanocortin peptides

Overview

Melanotan II, often written MT-II, is a synthetic cyclic heptapeptide modelled on α-MSH; the fact table gives its sequence, formula, mass and CAS. It shares our pigmentation research page with Melanotan I, which is linear and almost twice as long. The human study in our product data that we list, Dorr and colleagues (1996), was a small pilot phase-I evaluation of this peptide. Melanotan II has not been approved as a medicine; related melanocortin peptides that have approvals are different molecules, and those approvals do not cover it. We supply it as lyophilized research material in kits of ten vials.

Batch documents

The COA of every lot of Melanotan II reports:

HPLC purityPurity against the specification, in %
MS identityMolecular mass of the peptide confirmed
EndotoxinResult reported with its unit
FillAmount of peptide per vial

Ask for the COA of the batch you are quoted; the batch number on it is the batch we ship.

Report previews for Melanotan II

Each picture is the first page at low resolution, with numbers, dates and signatures covered, so the small print cannot be read. The full, clear copy comes from sales — ask for it by product and strength.

Batch COA

Melanotan II 10 mg

Tests:: HPLC purity · MS identity
Source:: Lot release certificate

Full, clear copy from sales — ask by product and strength.

All batch COAs and test reports we show: Batch COA page.

Independent test fails? Full refund. How the refund works

Fact table

Field	Value	Source
Chemical name	Melanotan II	Our product table
Other names	Melanotan 2 · MT-II · MT-2	Our product table
Sequence	JDHFRWK	Our product table
Molecular formula	C50H69N15O9	Our product table
Molecular weight	1024.2 g/mol	Our product table
CAS number	121062-08-6	Our product table
Strengths (per vial)	10 mg	Our product table
Kit and minimum order	10 vials per kit · from 1 kit per strength	Our product table
Form	Lyophilized powder	Our product table
Catalogue codes	10 mg: MT210	Our product table
Purity specification	≥ 99.0% (HPLC)Specification; the measured value is on the COA of the lot.	Our product table
Appearance	White to off-white lyophilized powder	Our product table
Storage	Store at 2–8 °C, protected from light and moisture	Our product table
Batch COA	HPLC purity · MS identity · endotoxin · fill — every lot	Our batch COA

Product-table values checked 2026-10-09. The measured values of a lot are on its COA.

What the literature studied

First author / trial	Year	Journal	What was studied	Record
Dorr RT	1996	—	Pilot phase-I evaluation of Melanotan II in a small group of male volunteers	PubMed 8637402

Studies recorded in our product data (checked 2026-10-09). They show what has been researched with this molecule — the materials and models of each study — and are not a statement about the vials we supply.

How to order Melanotan II

01Name Melanotan II, the strength you need (10 mg per vial) and the number of kits — one kit is 10 vials, from 1 kit per strength.
02You get a written quote within 24 hours: unit price per kit, shipping and lead time, with the COA of the batch we would ship.
03Accept the quote and settle payment with our sales team in the chat, by WhatsApp or e-mail; nothing is paid on this website.
04The kits leave China by international express, together with the COA of their lot.

Before you ask for a quote

What to put in your quote request

01Product and strengthchemical name or catalogue code, e.g. Acetyl Octapeptide-3, 10 mg
02Number of kitsper product and strength — 1 kit is 10 vials
03Destination countryfor shipping cost and transit time
04When you need ita delivery date, if you have one
05Documentsbatch COA, third-party report
06Labelscustom labels, if you need them

With these facts the first reply can carry the unit price per kit, shipping and lead time.

Questions

Is Melanotan II the same as bremelanotide?

No. Bremelanotide is a separate melanocortin peptide with its own structure and approval. Melanotan II is a different molecule, and neither that approval nor the one for afamelanotide applies to it.

How is Melanotan II supplied?

As lyophilized powder in sealed vials, ten vials per kit, at the strength shown in the fact table. The batch COA of the lot reports purity, identity, endotoxin and fill.

How many vials are in one kit of Melanotan II?

One kit is 10 vials of the same product at the same strength. Each vial holds the stated amount, for example 10 mg of lyophilized peptide; the few solutions are stated per vial in mg or ml. 1 kit per product and strength. One order can combine several products and strengths, each from 1 kit.

What does the batch COA of Melanotan II report?

HPLC purity, MS identity, endotoxin and fill, on the COA of every lot of a stocked peptide. The COA carries the lot number, so you can match it to the vials you receive. Yes. Ask for the COA of the batch you are quoted; the batch number on that COA is the batch we ship.

How is Melanotan II priced?

In writing, per request. Prices are tiered by the number of kits of each peptide and strength; the quotation gives the unit price per kit, the shipping cost and the lead time. We reply within 24 hours.

Why might another listing give a different CAS or molecular weight for Melanotan II?

Because listings describe different forms: a free peptide or a salt (acetate, TFA), a copper complex or its free peptide, one peptide or a two-peptide material — and some registries keep older numbers. Each product page says which form its values refer to; the COA of the lot is the reference.

Ordering and documents

Melanotan II

Cyclic seven-residue melanocortin peptide (MT-II)

10 mg per vial

10 vials per kit

from 1 kit

Lyophilized powder

≥ 99.0% HPLC (spec.)

Stocked

Research topic: Pigmentation · group: Melanocortin peptides

Overview

Batch documents

The COA of every lot of Melanotan II reports:

HPLC purityPurity against the specification, in %
MS identityMolecular mass of the peptide confirmed
EndotoxinResult reported with its unit
FillAmount of peptide per vial

Ask for the COA of the batch you are quoted; the batch number on it is the batch we ship.

Report previews for Melanotan II

Batch COA

Melanotan II 10 mg

Tests:: HPLC purity · MS identity
Source:: Lot release certificate

Full, clear copy from sales — ask by product and strength.

All batch COAs and test reports we show: Batch COA page.

Independent test fails? Full refund. How the refund works

Fact table

Field	Value	Source
Chemical name	Melanotan II	Our product table
Other names	Melanotan 2 · MT-II · MT-2	Our product table
Sequence	JDHFRWK	Our product table
Molecular formula	C50H69N15O9	Our product table
Molecular weight	1024.2 g/mol	Our product table
CAS number	121062-08-6	Our product table
Strengths (per vial)	10 mg	Our product table
Kit and minimum order	10 vials per kit · from 1 kit per strength	Our product table
Form	Lyophilized powder	Our product table
Catalogue codes	10 mg: MT210	Our product table
Purity specification	≥ 99.0% (HPLC)Specification; the measured value is on the COA of the lot.	Our product table
Appearance	White to off-white lyophilized powder	Our product table
Storage	Store at 2–8 °C, protected from light and moisture	Our product table
Batch COA	HPLC purity · MS identity · endotoxin · fill — every lot	Our batch COA

Product-table values checked 2026-10-09. The measured values of a lot are on its COA.

What the literature studied

First author / trial	Year	Journal	What was studied	Record
Dorr RT	1996	—	Pilot phase-I evaluation of Melanotan II in a small group of male volunteers	PubMed 8637402

How to order Melanotan II

01Name Melanotan II, the strength you need (10 mg per vial) and the number of kits — one kit is 10 vials, from 1 kit per strength.
02You get a written quote within 24 hours: unit price per kit, shipping and lead time, with the COA of the batch we would ship.
03Accept the quote and settle payment with our sales team in the chat, by WhatsApp or e-mail; nothing is paid on this website.
04The kits leave China by international express, together with the COA of their lot.

Before you ask for a quote

What to put in your quote request

01Product and strengthchemical name or catalogue code, e.g. Acetyl Octapeptide-3, 10 mg
02Number of kitsper product and strength — 1 kit is 10 vials
03Destination countryfor shipping cost and transit time
04When you need ita delivery date, if you have one
05Documentsbatch COA, third-party report
06Labelscustom labels, if you need them

With these facts the first reply can carry the unit price per kit, shipping and lead time.

Questions

Is Melanotan II the same as bremelanotide?

No. Bremelanotide is a separate melanocortin peptide with its own structure and approval. Melanotan II is a different molecule, and neither that approval nor the one for afamelanotide applies to it.

How is Melanotan II supplied?

As lyophilized powder in sealed vials, ten vials per kit, at the strength shown in the fact table. The batch COA of the lot reports purity, identity, endotoxin and fill.

How many vials are in one kit of Melanotan II?

What does the batch COA of Melanotan II report?

How is Melanotan II priced?

Why might another listing give a different CAS or molecular weight for Melanotan II?

Melanotan II

Overview

Batch documents

Report previews for Melanotan II

Melanotan II 10 mg

Fact table

What the literature studied

How to order Melanotan II

Before you ask for a quote

Questions

Ordering and documents

More in melanocortin peptides

Melanotan I

KPV

Melanotan II

Overview

Batch documents

Report previews for Melanotan II

Melanotan II 10 mg

Fact table

What the literature studied

How to order Melanotan II

Before you ask for a quote

Questions

Ordering and documents

More in melanocortin peptides

Melanotan I

KPV